微信在线咨询
| 产品编号 | 产品名称 | 产品包装 | 产品价格 |
| P5885-500μg | Recombinant Rhesus Macaque Flt-3 Ligand | 500μg | 16890.00元 |
| P5885-10μg | Recombinant Rhesus Macaque Flt-3 Ligand | 10μg | 1671.00元 |
| P5885-100μg | Recombinant Rhesus Macaque Flt-3 Ligand | 100μg | 9581.00元 |
| P5885-1mg | Recombinant Rhesus Macaque Flt-3 Ligand | 1mg | - |
| Species | Gene ID | Accession | Source | Length | MW | Tag |
| Rhesus Macaque | 719239 | H9Z6V7 | E. coli | 159aa | 18kDa | － |
| About this protein | |
| Name | Recombinant Rhesus Macaque Flt-3 Ligand (Recombinant Rhesus Macaque Fms-related Tyrosine Kinase 3 Ligand; rRhFlt-3L)；重组恒河猴Fms相关酪氨酸激酶3配体 |
| Synonyms | Fms-related tyrosine kinase 3 ligand; FLT3LG |
| Purity | >97% by SDS-PAGE and HPLC analyses. |
| Biological Activity | Fully biologically active when compared to standard. The ED50 as determined by a cell proliferation assay using human Aml5 cells is less than 1.0ng/ml, corresponding to a specific activity of >1.0×106IU/mg. |
| Physical Appearance | Sterile Filtered White lyophilized (freeze-dried) powder. |
| Formulation | Lyophilized from a 0.2μm filtered solution in PBS, pH7.4. |
| Endotoxin | Less than 1EU/μg of rRhFlt-3L as determined by LAL method. |
| Reconstitution | We recommend that this vial be briefly centrifuged prior to opening to bring the contents to the bottom. Reconstitute in sterile distilled water or aqueous buffer containing 0.1% BSA to a concentration of 0.1-1.0mg/ml. Stock solutions should be apportioned into working aliquots and stored at ≤-20℃. Further dilutions should be made in appropriate buffered solutions. |
| Category | Cytokine |
| Background | Flt-3 ligand (FL) is a recently identified hematopoietic cytokine whose activities are mediated by binding to the transmembrane glycoprotein Flt-3. Flt-3 was first discovered as a member of the class III subfamily of receptor tyrosine kinases (RTK) whose expression among hematopoietic cells was found to be restricted to highly enriched stem/progenitor cell populations. Additionally, class III RTKs include the receptors from SCF, M-CSF and PDGF. Not surprisingly, Flt-3 ligand is also structurally related to M-CSF and SCF. All three cytokines have been shown to exist both as type I transmembrane proteins and as soluble proteins. The predominant human FL isoform is a transmembrane protein that can undergo proteolytic cleavage to generate a soluble form of the protein. FL has been shown to synergize with a wide variety of hematopoietic cytokines to stimulate the growth and differentiation of early hematopoietic progenitors. |
| Amino Acid Sequence | TQDCSFQHSP ISSDFAVKIR ELSDYLLQDY PVTVPSNLQD EELCGALWRL VLAQRWMERL KTVAGSKMQG LLERVNTEIH FVTKCAFQHP PSCLRFVQTN ISRLLQETSE QLVALKPWIT RQNFSRCLEL QCQPDSSTLP PPRSPGALEA TALTAPQRP |
包装清单:
| 产品编号 | 产品名称 | 包装 |
| P5885-10μg | Recombinant Rhesus Macaque Flt-3 Ligand | 10μg |
| P5885-100μg | Recombinant Rhesus Macaque Flt-3 Ligand | 100μg |
| P5885-500μg | Recombinant Rhesus Macaque Flt-3 Ligand | 500μg |
| - | 说明书 | 1份 |
保存条件:
-20℃或更低温度保存，至少一年有效。由于蛋白的每次冻融均会引起部分失活，所以首次配制成相应浓度的储存液后(请根据产品简介中Reconstitution一栏的信息配制储存液)，须分装后-20℃或更低温度冻存，以避免反复冻融。
注意事项:
由于有些塑料管壁对某些蛋白有较强的吸附作用，溶液中的蛋白很容易粘附在管壁上，并且粘附后的蛋白很难与管壁分离。而载体蛋白(Carrier protein，如0.1% BSA等)的主要作用是预先封闭塑料管壁上的蛋白结合位点，使细胞因子或重组蛋白不会粘附于管壁。所以一定要使用产品简介中Reconstitution一栏的信息配制储存液。
本产品仅限于专业人员的科学研究用，不得用于临床诊断或治疗，不得用于食品或药品，不得存放于普通住宅内。
为了您的安全和健康，请穿实验服并戴一次性手套操作。
使用说明：
1. 收到产品后请立即按照说明书推荐的条件保存。除非特别注明，碧云天相关产品均为冻干粉，由于微量的蛋白在冻干过程中沉积在管内，形成很薄或不可见的蛋白层，所以在打开管盖前，我们建议在离心机中约8,000-12,000g离心10-30秒，使附着在管盖或管壁上的蛋白聚集于管底。
2. 请根据实验目的并按照产品简介中Reconstitution一栏中的信息配制储存液。大多数细胞因子或重组蛋白的冻干粉是非常容易溶解的，一般用移液枪的枪头轻吹几下或者轻轻摇晃瓶子，即可使细胞因子或重组蛋白完全溶解。请勿用vortex剧烈振荡，以免蛋白变性而失活。
3. 具体的最佳工作浓度请自行参考相关文献，或者根据实验目的，以及特定细胞和动物，通过实验进行摸索和优化。
微信在线咨询
